Machine Vision Windows Development

Turning industrial cameras into Windows software you can actually use on the floor.

We cover image acquisition and display using industrial camera SDKs, inspection and measurement processing, device integration, data storage, and modification of existing software.

The founder worked on machine vision system development at a previous employer, and supports your project by combining that with experience in Windows development centered on C++ / .NET.

Requests like these are welcome

You want to develop a Windows app using a camera maker's SDK
You want a UI you can ship as a product, not the sample that came with the SDK
You want to acquire and display camera images in real time
You want to handle multiple cameras
You want dimensional measurement, position detection, and pass/fail judgment from the captured images
You want to link capture with PLCs, sensors, I/O, and external equipment
You want to save inspection images and judgment results to a database, CSV, or similar
You want to migrate old image-inspection software to Windows 11
You want overseas machine vision equipment customized for Japan

In practice, image-processing accuracy is almost never the only point at issue. Only once capture timing, signal exchange with the equipment, display that keeps up, and traceability of the stored data are all covered does it become software you can use on the floor.

Areas we cover

Camera / Sensor

Industrial cameras, line sensors, lighting, and external triggers.

SDK / Driver

The SDKs and drivers supplied by the camera maker, and the connection standards.

Image Acquisition and Image Processing

Acquisition, preprocessing, feature extraction, position detection, measurement, and pass/fail judgment.

Windows Application

Real-time display, operator UI, settings management, and operation logs.

PLC / DB / MES / File / Network

Device integration, sending out judgment results, and storing and sharing inspection data.

We can take on just one part of this flow, or the whole thing from top to bottom. This is an area where many requests start from "we can get images out of the camera, but we can't build what comes after that."

What we handle

Image capture

Industrial camera SDKs, triggered capture, continuous capture, and multiple cameras.

Image processing

Preprocessing, feature extraction, position detection, measurement, and judgment.

Windows apps

C++ / C# / .NET, real-time display, and operator UI.

Device integration

PLCs, I/O, sensors, and external equipment.

Data

Inspection images, measurement values, logs, CSV, databases, and traceability.

Existing systems

Bug investigation, feature additions, SDK updates, and OS migration.

We also support overseas machine vision manufacturers entering the Japanese market

If you are an overseas manufacturer selling industrial cameras or image-processing equipment in the Japanese market, you can also talk to us about additional Windows software development built on top of your products, and about technical support for your Japanese customers.

We act as your software engineering partner on the Japanese side, covering development of customer-specific applications on top of your SDK, Japanese-language UI support, integration into existing equipment, and technical inquiries and issue isolation.

We work in either Japanese or English. We can also take on the technical conversations with Japanese end users in Japanese and share them with you in English.

Talk to us about software support for the Japanese market

Hands-on machine vision experience × Windows specialization

The founder worked on machine vision system development at a previous employer. Today he specializes in Windows software, and handles the implementation as a Windows application, covering not only the image-processing algorithm but the camera SDK, UI, device integration, and data storage as well.

*The experience in the machine vision field is the founder's personal work history at a previous employer (founder's profile). We present it separately from the corporate track record of KomuraSoft LLC.

As a company, we handle development of device-integration applications that include industrial cameras, and investigation of communication stalls and failures during long-running operation. As a related case, we publish how we isolated a problem where communication with an industrial camera stalled for several seconds.

How we proceed

1

Organizing capture conditions and judgment criteria We confirm the target, the lighting, the resolution, the takt time, the criteria for pass and fail, and what level of missed detections and false detections you can accept.

2

Deciding the configuration We decide the camera and SDK, where the processing runs, how signals are exchanged with the equipment, and where data is stored. If equipment is already in place, we identify its constraints first.

3

Implementation and verification on the real thing We implement while checking against the actual workpieces and camera. We check processing time, missed captures, and behavior under long-running operation as well.

4

Putting it into operation We organize the logs, the stored data, and the procedure for isolating problems when something goes wrong, and hand it over in a form where causes can be traced later.

When this is a good fit

You have people who can do image processing, but no one who can pull it together as a Windows app
The SDK sample runs, but you can't see the path from there to a product
You inherited the software for an inspection machine and don't know what is inside it
Capture and equipment motion are out of sync, and images are being missed
There is no mechanism for keeping inspection results, so you can't trace the cause of defects afterwards
You want overseas image-processing equipment integrated to fit a Japanese production site

Frequently Asked Questions

Is your track record in machine vision a corporate one?

No. The experience in machine vision system development is the founder's personal work history at a previous employer, as an image processing engineer. We present it separately from the corporate track record of KomuraSoft LLC. As a company, we handle development of device-integration applications that include industrial cameras, and investigation of communication faults and failures that appear during long-running operation.

Can we ask you to develop only the image processing algorithm?

You are welcome to talk to us. What we are good at, however, is not the algorithm on its own, but making the whole thing hold together as a Windows application that runs on the floor, including the camera SDK, display, operator UI, device integration, and data storage. If research and development of the algorithm itself is the main goal, we may point you to a partner better suited to that.

Can we talk to you before we have decided on the camera or the SDK?

Yes. We first organize the target to be imaged, the resolution required, the takt time, the connection method, and the installation environment, and then work through the configuration, including which camera and SDK to use and where the processing should run.

We are an overseas manufacturer. Can we ask you for software support aimed at the Japanese market?

Yes. We act as your software engineering partner on the Japanese side, covering development of customer-specific applications on top of your SDK, Japanese-language UI support, integration into existing equipment, and technical inquiries and issue isolation. We also work in English.

Can you handle just the modification of existing image-inspection software?

Yes. We handle modifications that keep the existing software in place, such as bug investigation, feature additions, keeping up with camera SDK updates, and migration to Windows 11. If neither the specification documents nor the people who worked on it are still around, we start by reconstructing the specification from the actual behavior.

Get in Touch

If this service area matches the problem you are dealing with, please contact us with the current situation and what kind of support you need.

Contact